Stainless Steel Davit Assembly
- Tested to EN795 Class B
- Suitable for 2x HRA fall arrest recovery devices or 1x HRA fall arrest recovery device and 1x IKAR load winch
- Weighs 36 Kg without base and accessories
Please note that this does not include any devices, brackets or base plate.
IKAR Fall Arrest Block With Manual Recovery
This fall arrest block features a very sturdy aluminium housing to protect the device from day to day wear and tear and an integral recovery mechanism. The HRA fall arrest block is a low maintenance device, fitted with a steel rope lifeline and terminated with a steel double action hook connector this block is ready to use. The anchorage point at the top of the fall arrest block is an open steel handle suitable of connection via a large connector or connector and anchor sling combination.
This fall arrest blocks built in recovery mechanism is engaged by pulling a pin on the side of the block which engages a winding handle. This handle allows the device to be used to lift or lower a casualty post fall, or if they have become incapacitated in a confined space.
The HAS series fall arrest block lifelines are tested in a simulated fall over an edge and have passed the German draft amendment EN360. Please note: not all "edges" will react in the same way as the tested steel edge. In use every effort must be made to ensure that in the event of an arrested fall, the fall arrest block lifeline does not pass over an edge.
HRA blocks are available in 12m, 18m, 24m, 30m, 42m.
IKAR Load Winch 20m
Load winch with 20m of 6mm cable
The IKAR load winch is suitable for easy and jolt free lifting and lowering of diverse loads.
- SWL 250Kg
- Requires mounting bracket to fix to IKAR tripod
- Approx Weight: 7kg
Please note, The IKAR Load Winch device is for lifting lowering loads not personnel.